|
|
Reviews readiness and prevention of hazardous
situations. This comprehensive book describes appropriate employee
behavior while on the rig and describes the many types of safety
equipment. Focusing on the importance of safety on any rig, this
lesson covers safe transportation to and from a rig, hand- and
power-tool safety, rig operations and equipment, first aid, and
proper response to emer-gencies. Fully illustrated with review
questions, answers, and a complete glossary. |
Drillers Club online
* Shop UK and Europe |
|
| Introduces the science of controlled directional drilling. Describes the types and uses of directional holes and how a well is planned. Also provides information about the equipment needed to drill directionally; how to obtain and use the equipment, and the problems associated with directional drilling.
|
|||
|
Covers the
purpose and planning of a well using different types of bits.
Expertly written, this updated book explains why certain bits are
selected and how they are used. Also covers bit wear and tear and
replacing bits as well as the effects of weight and rotary speed.
Additional discussions focus on drilling fluid use, bit hydraulics,
and formation properties, demonstrating the importance of maintain-ing
bit performance and functionality. Includes detailed illustrations,
review questions, answers, and a complete glossary. |
|||
|
Replaces The Drill Stem lesson in the series and covers design, function, handling, care, and inspection of drill collars. Discussions also include drill pipe design, recommended sizes, grades, handling, and care. Measurements are given in both U.S. and SI units. Also includes illustrations, summaries, review questions, and a glossary.
|
|||
|
Easy to read as it acquaints new crewmembers with
equipment and procedures they will encounter as floorhands,
motorhands, derrickhands, and, later, as drillers or toolpushers.
Measurements are given in both U.S. and SI units. Also includes
illustrations, summaries, and review questions. |
|||
|
Replaces the Rotary, Kelly, and Swivel lesson in
the series. Describes the rotating components: rotary, rotary table,
swivel, kelly, top drive, and related tools such as slips and tongs.
Measurements are given in both U.S. and SI units. Also includes
illustrations, summa-ries, review questions, and a glossary.
|
|||
|
Describes factors affecting hole deviation and methods of control. Explains the purpose of each tool in the bottomhole assembly and emphasizes how tools are selected and assembled for maximum effectiveness. Fully illustrated with review questions, answers, and a complete glossary.
|
|||
|
Deals with proper handling and maintenance of the crown and traveling blocks and the drilling line. Also covers equipment inspection procedures and programs to increase the service life of drilling lines. Measurements are given in both U.S. and SI units. Also includes illustrations, summaries, review questions, and a glossary.
|
|||
| BOP |
|||
| Provides an
introduction to management skills for drillers, toolpushers, and
other first-level supervisors in the petroleum industry. Eight
lessons are presented in one clearly illustrated, easy-to-read
volume: 1.What Is Management? 2.What Is Leadership? 3.How Do You Handle Personnel Problems? 4.How Do You Start Out a New Hand? 5.How Do You Train Employees? 6.Where Do You Fit into the Organization? 7.How Do You Plan and Organize Work? 8.How Can Work Be Done More Efficiently? Each lesson begins with learning objectives and includes a self-test covering all material in the book. The text complements the nine-part Man Management and Rig Management video series listed in the audiovisual section of this catalog. |
|||
|
Acquaints offshore personnel with the parts and functions of pedestal cranes, including prime movers and transmissions. Discusses wire rope and slings, safe load rigging and handling, safe hoisting procedures, and hand signals. |
|||
Testing and Completing: Unit II Lesson 5 (Rotary Drilling Series) [Paperback] Mark Longley (Editor) |
|||
Provides a comprehensive look at offshore facilities, work conditions, travel, and personal living conditions for new employees work-ing offshore. Focuses on the global industry of offshore operations that relies on modern technology and drilling methods, under-standing that living offshore remains a great challenge. Helps personnel become settled in their temporary offshore homes. |
|||
|
There are over 50 books on this series
|
|||
| There are literally 1000’s of interesting books and manual that can be used as teaching aids, if you cant find one that suite your purpose why not try one of the following links | |||
|
|
|||
|
|
|||
